Pressure Valves

产品中心

Please select content

Clear all Product Comparison

RF series

Direct Relief Valve

1.RF-G01 series remote control relief valve, used to connect to the remote control of the pressure valve control port, remote control, but also can be double pressure or three pressure control 2.RF-G02 series direct acting relief valve is used for small flow circuit of the highest pressure regulation, or as a safety valve

Contrast
DRF series

Low Noise Pilot Operated Relief Valve

1. High working pressure, large flow rate, fast reaction speed. 2. Protect the pump and control valve from overpressure, and keep the hydraulic system at constant pressure. 3. Remote control and unloading can be achieved by means of oil unloading port.

Contrast
DSRF series

Low Noise Pilot Solenoid Controlled Relief Valve

1. It has the characteristics of high working pressure, large flow rate and fast reaction speed 2. The pump can be unloaded by electrical signal 3. The pilot relief valve is used to control the hydraulic system in two ways

Contrast
UP series

Unloading Relief Valve

In the accumulator circuit or high and low pressure circuit, the UP series unloading relief valve keeps the hydraulic pump running under the minimum load to save power and extend service life.

Contrast
SUP series

Solenoid Controlled Unloading Relief Valve(Nominal size :DG32)

SUP series solenoid controlled unloading relief valve not only has the characteristics of UP, but also can make use of the electric signal of the solenoid valve to unload the pump.

Contrast
PR(C)V series

Pressure Reducing (and check) Valve

1. The pressure reducing valve is a branch circuit, used to set the pressure lower than the main circuit, but also through the remote control port, remote control. 2. Pressure reducing check valve is a parallel check valve, so that the first port to the secondary port can reach the pressure control, the second port to the first port can free flow.

Contrast
S(C)V series

Sequence And Check Valve

1. The sequence valve is a direct acting valve with a control oil hole, which can be controlled internally or externally, and can produce different functions of low pressure relief valve, sequence valve and unloading valve according to different combinations 2 sequence and check valve oil flow can be secondary pressure oil port free flow to primary pressure oil port, according to the combination of different functions of the balance valve, sequence and check valve

Contrast
PS series

Mechanical Pressure Switch

When DC power is used, a surge device should be installed to prolong the life of the contact.

Contrast

«
1
2
»